|
|
BASIC "DO'S & DON'TS " OF POR-15
-
Don't
open the POR-15 can until you are ready to paint.
-
Don't
paint directly from the POR-15 can,
unless you are going to use up all the paint in one session.
-
Do wear latex or rubber gloves when working with POR-15. If it dries
on your skin, it has to wear off.
-
Don't shake up a can of POR-15. Do
stir it, like a great Martini
-
Do pour out, from original can, only as much paint as you'll use up
within 20 minutes.
-
Do
wipe down lid and rim of original can throughly, and replace lid immediately!
-
Don't pour back into original can, the paint you have not used. It will
ruin the remaining paint.
-
Do make
sure surface to be painted is bone-dry. Use a blow dryer if necessary.
-
Do
use METAL-READY
first if you are painting POR-15 on new steel, galvanized
metal, aluminum, or any smooth metal surface.
-
Do
use METAL-READY
if your job had to be degreased or cleaned.
-
Do use an organic vapor particulate respirator, NIOSH/MSHA approved when spraying
POR-15. If you are spraying in an enclosed area, you must
use an air-supplied respirator.
-
Do apply
in thin coats.
-
Don't apply POR-15 to a "tacky" surface. wait until the first coat is dry
to the touch before applying a second coat of POR-15.
-
Don't mix other paints with POR-15. Never
try to add color to POR-15.
-
Do topcoat
POR-15 with an opaque paint, if left exposed to prolonged sunlight.
-
Do store remaining
POR-15 (once opened) in a cool, dry location such as a refrigerator.
-
Do call
your POR-15 Marine Representitive
Toll Free at 800-231-2587 if
you have any further questions or need additional products or information.
|
